SmartFilter TC™ Multichannel Thermocouple Signal Conditioner

Dycor SmartFilter TC FilterDesigned to work in conjunction with dataTaker® data loggers, the SmartFilter TC™ Multichannel Signal Conditioner supports up to 40 channels of fully isolated thermocouples in high electrical noise environments. The SmartFilter TC™ acts as a low pass filter, allowing the thermocouple signal to be passed to the dataTaker® logger, while filtering higher frequency, higher amplitude signals that cause measurement errors.

The SmartFilter TC™ uses advanced analog and digital signal processing to filter out alternating current (AC) interference that can cause significant electrical noise in thermocouple measurements. It was designed and built for use with the dataTaker® DT8X series data loggers and the CEM20 channel expander, with the filter being wired between the CEM20 and the data logger. The filter reads the unfiltered thermocouple mV signal from the CEM20 and outputs a filtered mV signal to the data logger.

Features of the SmartFilter TC® Multichannel Filter

  • 40 channels of fully isolated thermocouples
  • Designed for use with dataTaker® DT80X series data logger and CEM20 channel expander
  • 1,000VAC isolation
  • Supports all thermocouple types
  • Open thermocouple detection
  • Wide operating temperature range: -40°C to +85°C
  • Status LED’s
  • DIN rail mountable

SmartFilter TC™ Multichannel Specifications

Model 100-0538

Input Impedance 10 kΩ @ 10 kHz;  >1 GΩ @ DC
Total thermal drift 25ppm/°C
Thermocouple maximum loop resistance 50 kΩ
Normal mode rejection 100dB at 50/60Hz
Low pass filter cutoff frequency 30Hz
Differential mode rejection ratio (DMRR) Up to 10Vrms
Total temperature error over -40°C to +60°C ambient <1.0°C
Analog output range -6mV to +30mV (-50°C to +800°C type K)
Sample rate 1 reading per 3.5 seconds/channel
Operating temperature -40°C to +85°C
Connections Removable terminal block 3.81/5.08 pitch
Mounting DIN rail
Dimensions 86mm W x 105mm L x 60mm H
Power supply 10 – 30VDC
Power consumption < 100uA sleep, < 100mA @ 12VDC operating, 130mA maximum
Weight 190gm
Certifications Class I Division 2 (C1D2) Groups C & D Hazardous Locations

Talk to Dycor

Dycor creates Engineering Solutions for Real World Industrial Problems.

Talk to us today about your project, implementation, or component needs.  Dycor offers a full range of solutions from complete systems, to sensors and integration components.